DEC HARDWARE INSTALL TEMPLATES

Cabinet Hardware Installation Template

Amerock
Product # TMPMULTI
Item No. TMPMULTI
Spend less time installing and more time enjoying your finished project! In three easy steps, the Amerock door and drawer installation template allows you to precisely install your cabinet hardware, making it an ideal solution for kitchen and vanity installations. Compatible with all Amerock knobs, as well as pulls ranging from 3in (76mm) to 5-1/16in (128mm) center-to-center measurement.
n/a
$15.04
This product cannot be ordered at the moment.
The Amerock TMPMULTI Installation Tool Cabinet Door/Drawer Combo Pack Template is finished in N/A.
  • Cabinet hardware installation template combo pack for doors and drawers
  • Simplifies cabinet hardware installation
  • For use with all Amerock knobs and pulls ranging from 3 in (76 mm) Between Hole Centers to 5-1/16 in (128 mm) Between Hole Centers widths
  • Removes the guesswork from your cabinet hardware installation
  • Includes simple, easy to follow instructions
Item Type TEMPLATES
Product Length Fraction (in) 9-1/4
Product Length (mm) 235
Product Width Fraction (in) 8-1/4
Product Width (mm) 210
Product Projection Fraction (in) 1-1/4
Product Projection (mm) 32
Product Weight (lbs) 0.28
Included Hardware N/A
Base Material Plastic
Amerock, LLC Limited Warranty

Amerock, LLC (“Amerock”) warrants that all Amerock® products will be free from defects in material and workmanship for as long as you, the original purchaser, own the product. This warranty is effective as of April 22, 2021, and supersedes all previously written Amerock warranties. If an Amerock product is found to have a defect in material or workmanship during the warranty term, Amerock will send to the original purchaser, without charge, a new replacement product of the same or comparable style and quality.

Warranty Limitations:

Because Amerock cannot control the quality of products sold by unauthorized sellers, this warranty applies only to Amerock products that were purchased from Amerock or an Amerock authorized seller, unless otherwise prohibited by law. Amerock reserves the right to reject warranty claims from purchasers for Amerock products purchased from unauthorized sellers, including unauthorized Internet sites.

There are no warranties beyond those stated herein. Any implied warranties that may be applicable to products, including implied warranties of merchantability or fitness for a particular purpose, are limited in duration to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty does not include the removal or installation of Amerock products, which are the responsibility of the original purchaser. The Amerock warranty does not cover product failure caused by normal wear and tear, product misuse or abuse, improper installation, improper cleaning, accident, natural disaster, corrosive air, outdoor use, or alteration of any kind.

All Amerock finishes are handcrafted and held within a tight range of color variations. Slight variations in finish are not considered defects in material or workmanship.
Under no circumstances shall Amerock be liable for any special, incidental, or consequential damages based upon breach of this warranty, breach of contract, or strict liability. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

How to File a Warranty Claim:

Purchasers who wish to make a claim under this warranty and receive a replacement product should:
  • Contact Amerock Customer Care by calling 1-800-435-6959 or emailing [email protected]. Please have information available regarding where and when you purchased your product.

  • Amerock Customer Care will review your warranty claim and contact you in a timely manner.

  • In connection with processing your warranty claim, you will be required to provide Amerock a proof of purchase, and you may be asked to mail your product to Amerock. Please send your proof of purchase by email to [email protected] or by mail to the address below and your product (if requested) to the address listed below. Be sure to include your contact information - name, address, phone number, email address with your proof of purchase and any returned product. You are responsible for any costs incurred in connection with mailing these items to Amerock. Amerock is also not responsible for items lost in shipping. As such, we recommend using a carrier that provides tracking and delivery confirmation.

  • Send the package, prepaid, to:
    Amerock Customer Care
    10115 Kincey Avenue, Suite 210
    Huntersville, NC 28078
This warranty gives you specific legal rights, and you may have other rights which vary from State to State.
0 reviews
Reviews (0)
There are no reviews yet.
Simplify installation.
An all-in-one package, a drill bit is included with the cabinet hardware installation template.

Drill with confidence.
Take the guesswork out of cabinet hardware placement by measuring to ensure pulls are mounted straight on your cabinets.
A versatile cabinet hardware installation tool.
Designed for use with any knob, plus 3 pull sizes: 3in (76mm), 3-3/4in (96mm) and 5-1/16in (128mm) center-to-center.
Hassle-free hardware placement.
With the kitchen cabinet hardware installation template, it’s easy to ensure perfect, consistent placement across all cabinet sizes.

DEC HARDWARE INSTALL TEMPLATES

DEC HARDWARE INSTALL TEMPLATES

Description
Spend less time installing and more time enjoying your finished project! In three easy steps, the Amerock door and drawer installation template allows you to precisely install your cabinet hardware, making it an ideal solution for kitchen and vanity installations. Compatible with all Amerock knobs, as well as pulls ranging from 3in (76mm) to 5-1/16in (128mm) center-to-center measurement.
Specifications
Item Type TEMPLATES
Product Length Fraction (in) 9-1/4
Product Length (mm) 235
Product Width Fraction (in) 8-1/4
Product Width (mm) 210
Product Projection Fraction (in) 1-1/4
Product Projection (mm) 32
Product Weight (lbs) 0.28
Included Hardware N/A
Base Material Plastic
Reviews (0)
There are no reviews yet.
    Loading
    Loading